Cisco WAP4410N Wireless-N Access Point: PoE & Advanced Security Cisco Small Business Access Points
Highlights:
● Supports high-bandwidth applications with the 802.11n standard; backward compatible with 802.11b and g devices
● Connects to Power over Ethernet devices, simplifying installation and eliminating the need for and cost of installing external power supplies
● Protects business information with enhanced security, including rogue access point detection, advanced encryption, and select access filters
● Simplifies installation and configuration with easy-to-use web interface
Product Overview:
With the growth of high-bandwidth applications, such as storage and video, in the workplace, network performance is essential. Wireless technology is no longer lagging behind wired performance. The Cisco® WAP4410N Wireless-N Access Point (Figure 1) answers the growing business need for access, speed, and security.
The Cisco Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g), and Wireless-B (802.11b) devices to your wired network, so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the access point easy to install you can mount it anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you need to run only one cable to the access point to deliver both data and power. Of course, you can also use the included AC adapter if power is available nearby.
Moreover, the integrated quality of service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business-quality voice over IP (VoIP) and video applications.
To protect your data and privacy, the Cisco Wireless-N Access Point supports the industrial-strength wireless security of Wi-Fi Protected Access (WPA), encoding all your wireless transmissions with powerful encryption. The MAC address filter lets you decide exactly who has access to your wireless network, and advanced logging keeps you apprised of access attempts. The rogue access point detection capability notifies the administrator when an unauthorized access point is detected in the airspace. The WPS (Wi-Fi Protected Setup) feature facilitates simple and secure deployment of security in the wireless network. Configuration is a snap with the web browser-based configuration utility.
The Cisco WAP4410N Wireless-N Access Point is the best way to add wireless access to your existing business network.
Features:
● Draft 802.11n wireless networking delivers greater throughput and extended range, maximizing the number of wireless clients per access point for your small business;
● Easy installation and configuration via a web interface;
● Adjustable and removable dipole antennas with multiple-input, multiple-output (MIMO) 3x3 diversity;
● Gigabit Ethernet LAN interface
● Supports PoE and external DC power
● HTTP Redirect facilitates the display of a splash page on initial user access;
● IPv6 host support for managing the access point over IPv6;
● Multiple basic service set identifier (BSSID) support allows the creation of multiple secure wireless workgroups for users and guests;
● Service set identifier (SSID) to VLAN mapping maintains application security and quality across wireless and wired;
● WPS allows for simple and secure deployment of the wireless network;
● Logging via syslog, email, or local log;
● Wi-Fi Multimedia (WMM) wireless QoS support.
SPECIFICATII TEHNICE
Tipul echipamentului
Wireless-N Access Point
Caracteristici
• Frequency- Selectable-band 2.4 GHz or 5 GHz (not concurrent);
• Radio and modulation type- 802.11b/DSSS, 802.11g/OFDM, 802.11n/OFDM;
• Web user interface- Built-in web user interface for easy browser-based configuration HTTP/HTTPS);
• Management protocols-SNMP version 1, 2c;
• Event logging- Event logging, Email logging, Remote syslog;
• Web firmware upgrade- Firmware upgradable through web browser;
• Diagnostics - Flash, RAM, LAN, WLAN;
• DHCP- Dynamic Host Configuration Protocol - CLIENT;
• HTTP Redirect - Redirects initial user access to an external web server to display company logo or network usage policy;
• IPv6 hoast - Support for management and control of access point over IPv6 & RFC2460 (IPv6 protocol) and RFC4294 (IPv6 node requirements);
• BSSID - Multiple BSSID = 4, allowing the creation of multiple virtual access points;
• VLANs - Supports 802.1q, up to 4 VLANs;
• SSID to VLAN mapping - Supports mapping of SSIDs to VLANs to securely separate workgroups across wireless and wired domains;
• Spanning Tree - Supports 802.1d Spanning Tree Protocol to prevent loops when using wireless distribution system (WDS) links as redundant links in a distribution system;
• Operating modes - Access point mode, point-to-point bridge mode, point-to-multipoint bridge mode, repeater mode, wireless client mode;
• Load balancing - Allows bandwidth control with user-defined CPU usage ratios;
• Auto-channel selection - On boot-up, the access point selects the least congested channel;
• 802.11d regulatory domain - Enables the access point to provide radio channel settings for client devices, facilitating easy client access as they move across regulatory domains;
• Quality of Service - 4 queues, 802.1p VLAN priority, WMM wireless priority, Mapping of 802.1p VLAN priority to WMM wireless priority to maintain end-to-end QoS;
Indicatoare LED
• POWER LED—(Green) Lights up and remains lit when the access point is powered on.;
• PoE LED—(Green) Lights up when the access point is powered through an Ethernet cable.;
• WIRELESS LED—(Green) Lights up when the wireless module is active on the access point. This LED flashes when the access point is actively sending to or receiving data from a wireless device.;
• ETHERNET LED—(Green) Lights up when the access point successfully connects to a device through the Ethernet network port. This LED flashes when the access point is actively sending to or receiving data from one of the devices over the Ethernet network port..
Butoane
• Reset button
Rata transfer date
• IEEE 802.11b/g: 11, 12, 18, 24, 36, 48 si 54 Mb/s; • IEEE 802.11n: banda 20 MHz / MCS15 / maxim 144,4 Mb/s; • IEEE 802.11n: banda 40 MHz / MCS15 / maxim 300 Mb/s. Vezi: MCS Index Table
• 3 (omnidirectional)
• 2 dBi each antenna
Internal antennas optimized for wall, ceiling, or desktop placement
Securitate
• WEP/WPA/WPA2 - Wired Equivalent Privacy (WEP) 64-bit/128-bit, WPA-Pre-Shared Key (WPA-PSK), WPA2-PSK, WPA-ENT, WPA2-ENT; • Access control - Wireless connection control: MAC-based; • SSID broadcast - SSID broadcast enable/disable; • Client isolation - Supports wireless client isolation between and within SSIDs; • 802.1X - Wireless clients can be authenticated through IEEE 802.1X; • 802.1X supplicant - Supports 802.1X supplicant on the Ethernet port to allow the access point to authenticate itself to the network; • RADIUS server - Up to 2 RADIUS servers can be configured for redundancy purposes ; • WPS - Supports WPS, a WI-FI Alliance specification for simple and secure setup of a wireless network; • Rogue access point detection - New access points detected that have not been categorized as known are logged as rogue access points, allowing the administrator to clamp down on unapproved devices in the network
• 10/100/1000BASE-TX Ethernet;
• DC jack for 12V DC power;
• Support for 802.3af PoE.
Software
• Linux operating system
SISTEMUL SOLICITĂ
Browser
• Web-based configuration: Java-enabled web browser
• 802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC
Power over Ethernet (PoE)
● Switch/router with PoE support or PoE injector when used with PoE
CERTIFICÃRI PRODUS
Securitate
• UL 60950-1, • CAN/CSA-C22.2 No. 60950-1, • IEC 60950-1, • EN 60950-1
Norme Radio
• EN 300.328, • EN 301.893 (Europa), • EN 301.489-1 si -17 (Europa)
ALIMENTARE, MEDIU & DIMENSIUNI
Optiuni de alimentare
● Switch/router with PoE support;
● PoE injector when used with PoE (SB-PWR-INJ1-EU);
● 12V Power Adapter (SB-PWR-12V-EU).
Tip sursă alimentare
Externă (se achizitioneaza separat)
Tensiune intrare
100 ~ 240 Vca
Frecventã curent alternativ
50 ~ 60 Hz
Putere consumată
10,1 W
Tensiune ieșire
12 Vcc
Curent ieșire
1 A
Putere consumată PoE
10,06 W
Temperatura operare
0º ~ +40ºC
Temperatura stocare
-20º ~ +70ºC
Umiditate operare
10 ~ 85% (fără condens)
Umiditate stocare
5 ~ 90% (fără condens)
Dimensiuni echipament (L x H x A)
170 x 40,7 x 170 mm
Greutate
0,390 Kg
GARANTIE
5 Ani
PRODUSUL LIVRAT INCLUDE:
● Cisco WAP4410N Wireless-N Access Point with PoE;
● User guide on CD-ROM;
● Ethernet network cable;
● Power adapter;
● Product stands;
● Registration card.
DICTIONAR *
OSI - Open Systems Interconnection - Standard ISO/IEC 7498-1 (vezi OSI Model);
OSI Model - Open Systems Interconnection Model: este un model conceptual care caracterizează și standardizează funcțiile interne ale sistemului de comunicații în rețea IT, prin divizare în straturi (layers) funcționale. Arhitectura OSI este următoarea: Strat 1 = Physical layer, Strat 2 = Data link layer, Strat 3 = Network layer, Strat 4 = Transport layer, Strat 5 = Session layer, Strat 6 = Presentation layer, Strat 7 = Application layer;
PoE - Power-over-Ethernet - Sistem de alimentare (48 Vcc) al dispozitivelor conectate în rețea de calculatoare, print intermediul cablurilor de interfață Ethernet (conector tip RJ-45);
Wireless N - Standard de rețea IT radio (IEEE802.11n) care folosește mai multe antene, pentru cresterea puterii de transmisie-receptie;
_180x90pix.png "Canon 053 Cartus Cilindru (70K) pentru Seria i-Sensys LBP850, LBP852Cx (2178C001);")
